Main Display : TFT 240*240 ,1.3inch
Bluetooth: Bluetooth 4.0
Type of battery: Li-ion battery
Standby time: about 5-10 days
Compatilbe:IOS 9.0 or above/ Android 4.4 or higher
Sport Mode: Running, Walking, Riding, Climbing
Step counter: Support
Sleep Monitoring: Support
Heart rate: support
Heart Rate Monitoring: Support
Sedentary reminder: Support
Blood Oxygen: Support
Blood Pressure: Support
Music Control: Support
Sports Mode: Support
Find bracelet: support
UI interface selection: support
“Call, SMS, WeChat, QQ, WhatsApp, Facebook, Instagram, Kakao Talk, twitter, line notification alert”: Support
Shake Photograph: Support
“Do not disturb mode (22:00-8:00 bracelet stop receiving notification, raise the hand bright screen function has no effect)”: Support
Find the phone: support
Factory reset: Support
-The bracelet is an international version, only English, but the content of the message will synchronize the language of the phone: Support English, Czech, German, Spanish, French, Italian, Japanese, Korean, Portuguese, Russian, Chinese
-APP support language:(Andriod: Chinese, English, French, German, Japanese, Spanish, Italian, Korean, Czech, Russian, Portuguese
Ios: Chinese, English, French, German, Japanese, Spanish, Italian, Korean, Czech, Russian, Portuguese)
1 x Smart Bracelet,1x charger, 1x English User Manual
Introduction to watch function:
Sleep: The watch can record and display the total length of your sleep last night and the length of your deep sleep and light sleep. More detailed analysis and data logging can be viewed in the client
Weather information: The weather page shows the current weather, air quality information, and tomorrow’s status. Weather information needs to be connected to the client before data can be obtained. If the connection is disconnected for a long time, the weather information will not be updated.
Work out: Long press on the exercise page to start an exercise measurement record, there are 8 sports modes to choose from The last workout record information can be displayed on the exercise page.
Message push: The watch can receive notiﬁcation pushes on the display phonePush item switch can be set in the client The watch message page can store the last 3 message records
Camera control: When connected to a mobile phone, the watch can be used as a mobile phone camera remote control After turning on the camera on the phone, click on the watch camera control page to trigger the phone camera shutter
Smart alarm clock: The smart alarm clock of the watch can be set in the client. Up to 3 alarm clocks can be set When setting the time, the watch will display the alarm icon and vibrate
How to use it >>
step 1: Please charge your new device for at least 10 minutes or more before the first usage, this ensures normal device boot and optimal operation.
step 2: Power on ( long-press 5-7 sec this button to power on )
tips: the long-press button you can Switch to power on /off the page , back to home
step 3: download app, Please search “Wearfit 2.0 ” in your APP store and android market. and then download it, and then Bind Bracelet,(first time open APP, click bind bracelet )
step 4: open phone Bluetooth; search Bluetooth in APP, and connect Bluetooth
step 5: once your Bluetooth has been connected, the Data will be Sync, and watches time will Sync with your phone
step 6: you can click mine, to fill in your information
step 7: you can click device management, setting call reminder/message reminder, etc function
FAQ for P70 fitness tracker >>
Q: Why does the blood pressure value deviate from the sphygmomanometer?
A: The deviation between the measurement value of the watch and the sphygmomanometer is determined by a variety of factors. The measurement site of the sphygmomanometer is in the radial artery, and the measurement site of the watch is the two main branches of the arteriole. Normally, the aortic blood pressure measurement and the arteriole Blood pressure measurements will vary by three to forty; if you use a watch and a sphygmomanometer to measure at the same time because the blood ﬂows in the artery in the direction of the centrifuge, the sphygmomanometer measures the straps so that the lower part of your elbow is under pressure. Temporary blood cannot ﬂow smoothly to the branch of the artery below, and the vascular tension is increased, which will make the upper and lower blood pressure measurement values more biased.
Q: Why can’t the watch receive the message push?
A: Android phone settings1. Conﬁrm that the message push switch is enabled on the mobile client.2. The conﬁrmation message can be displayed normally on the mobile phone notiﬁcation bar. The watch message push is pushed by reading the mobile phone notiﬁcation bar message; if there is no message in the mobile phone notiﬁcation bar, the watch will not be able to receive the push(need to ﬁnd the notiﬁcation setting in the phone settings, open WeChat, QQ phone, SMS, notiﬁcation button of the mobile client)3. Open the auxiliary function settings of the wristband client(see the auxiliary function in the settings on the phone, and open the auxiliary function settings of the wristband client)
Apple phone settings:1. Conﬁrm that the message push switch is enabled on the mobile client.2. the conﬁrmation message can be displayed normally in the mobile phone notiﬁcation bar(need to ﬁnd the notiﬁcation settings in the phone settings, open WeChat, QQ phone, SMS, mobile phone client notiﬁcation switch)
Q: Why does the pedometer not count steps when I have already started walking?
A: To reduce errors, smart watch usually sets an initial value of 10, it will count steps when we walk more than 10 steps. The APP will show the real walking steps and start counting from step 10.
Q: What application is used when connecting to a smartphone?
A: App is “wearfit 2.0”, The app is designed by the supplier. You can scan the QR code on the package or manual to download it when you get the item.
Q: Why the device cannot boot or start up properly?
A: Please charge your new device for at least 10 minutes or more before the first usage, this ensures normal device boot and optimal operation. For devices with removable batteries, ensure they are properly installed before charging.
Q: Can not find the device when a pairing device?
A: Please make sure the distance between phone and device less than 0.5m
Please make sure the device is not under low battery.if there is still a problem after 1.5hours charging, Please contact us.
Q: Can you not connect the device with the app?
A: Some smartphone Bluetooth services will be abnormal when reboot. Please reboot the smartphone for pairing device.
Q: Why the android mobile disconnect?
A: Android mobile phone system memory management will be forced to turn off the background app, you need to turn off the power saving mode or pull the app into the system housekeeping green background inside, the app will not be forced to close. The app must be running in the background, Bluetooth will not automatically disconnect.
For the problem that the bracelet can measure the heart rate in things and in the air, the following explanation is made:
1. At present, the mainstream heart rate bracelets on the market adopt the same measurement method. The principle is not complicated, that is, the PMG signal of the radial artery is obtained by the reflective photoelectric measurement method, and the fast Fourier transform is performed on the PPG signal to analyze the frequency domain. To achieve the detection of the human heart rate. To put it simply, it is to use a light to the artery and then reflect it back. Based on the change of the reflected light, the heart rate of the human body is calculated.
2. Due to many factors such as the physiological structure of the human body, the color of muscles and blood, the green light is the color with the highest passing rate in the human body. Therefore, the light source of the heart rate sensor uses green light to achieve minimum loss and interference.
3. Heart rate wristband detection focuses on human tissue. Some data is also read for non-human objects. This is a known and normal phenomenon. After the data is based on the principle of light reflection, the heart rate detection will have a reading. This situation cannot be All avoided, so there will be problems with heart rate data in the case of heart rate bracelet (table) in the case of “air test”